Top 10 Tips For Selecting A Budget Laptop
Top 10 Tips For Selecting A Budget Laptop
Blog Article
You might ask "What is the 3V motherboard battery"? On the majority of PCs the motherboard holds a +3 Volt Lithium Battery which is used for two functions. Firstly it keeps the computer time updated. Secondly, on older PC's it keeps the BIOS settings (Low level start-up instructions) in memory.
There are several types of battery in use at the present time and each must be treated differently. There are Nickel-Cadmium (Ni-Cad), Nickel-Metal Hydride (NiMH) and Lithium-ion. Ni-Cad is old technology and hence only found in ancient handsets, so I will not be covering them in this article. NiMH batteries perform much better than Ni-Cad, typically giving 30% more talk time, but Lithium are thinner and give even higher performance. I will be concentrating on Lithium-ion as it is the most used modern mobile phone battery to date. Check which type of battery your phone has before following any of the following.
The mating process between the two engines can be in series or in parallel. When the two powertrains are mated in series, only one of the motors controls the cars movement. The other one simply assists the first, dominant engine. This occurs most often in mild or assist hybrids. The Saturn Vue Green Line Belt Alternator System (BAS) is a good example. The concept vehicle named the Volt from GM is another good example of a series but li ion stock not a mild hybrid.
When it's time to buy a new lithium ion battery, be sure you're buying one that's new (as in recently produced). Just like fruit has a shelf-life, so do batteries and just like you want to buy fresh produce, you also want to invest in "fresh" lithium ion cells. Check the date-code on the battery or packaging to ensure you're not buying a pack that's been degrading for a year on some shelf.
The weakest aspect of any smart phone would be battery life. You need to know the extent of your Lithium battery stocks Ion or suffer the consequences at the end of the sale. Most manufacturers offer some guidance on this department but only to the point they are most comfortable to share. What they wouldn't share to you is that you should never recharge your phone. You pick up the phone; saw that it is just around 30%. That is OK, leave it as it is. You juice it up fast, the device will not recharge as efficiently once you do it again. You need to drain the battery first from the stock power and then do the recharge.
If the battery in Lithium mines Ontario your computer is a nickel metal hydride or a nickel cadmium then it will experience memory degradation over time. To lessen the effects of this, make sure that you run the battery down to empty every time. Also ensure that you fully recharge the battery every time you recharge it.
Memory effect will reduce the life of a battery. Modern Lithium-ion batteries do not suffer from memory effect, although it does occur in Nickel-Metal Hydride (NiMH) units when charged from levels other than 0% of battery capacity. If the (NiMH) unit was fully charged when initially at say 20% capacity, the resulting available capacity would only be 80% of the factory original. Of course every time you charged the battery, the total available capacity would reduce and eventually your mobile phone would prove to be increasingly useless. Nearly all new electronic devices are now powered by Lithium batteries. You should always condition your (NiMH) battery from new.
And that's about it; not so hard, right? So, although lithium ion batteries might keep us on our toes, utilizing these few simple practices will help you keep your batteries performing at their peak for a whole lot longer. Respect your stuff and in return you'll enjoy really great results.